Dirty fiber optic endfaces are the major cause of problems in singlemode and multimode fiber optic systems. The FI-500 FiberInspector™ Micro fiber inspection scope camera removes the hassle associated with inspecting fiber end faces, especially in low light and high cable density situations. It is very simple to use: Simply plug the cable into the FI-500 and touch the AF button. Within seconds, the fiber endface comes into sharp, clear view. And if youre working in a difficult to reach place or you cant get the image to stand still, just touch the pause button to freeze the image.
PortBright™ illumination to see ports in dark and dense panels
Autofocus for stable images in a few seconds
Large display to view single mode and multimode fiber end faces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm). APC tips available
Autocenter for precise fiber ferule inspection
Todays high density fiber patch panels make inspection a challenge. Finding the cable or port to test can be tough, especially in the low light conditions found in most data centers and wiring closets.
The FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features pushbutton controls for simple operation. Autofocus camera provides a sharp view of the endface in a few seconds, while the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
The FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. The FI-500 has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Manual fiber inspection scopes are simple to use, but they dont work well on patch panels or situations where there is a high density of fiber. Holding it up to one eye and closing your other eye is often inconvenient or impractical, especially in a dark room.
Fully automatic inspection scopes analyze and grade the cleanliness of fiber connections which is important for many applications, but analysis is usually not needed for quick basic troubleshooting.
Autofocus and Autocenter
All manual scopes and many digital probes have manual focus rings. This may require two hands and is sometimes difficult to focus in densely packed patch panels. FI-500 can auto focus with the push of a button on the probe or on the display unit. Autofocus takes only 3-5 seconds and works great on UPC end faces.
Autofocus works on APC (angled physical contact) also, however, if the APC tip is not aligned with connector, the connector or probe may require rotation and repeating auto-focus or manual focus.
The anticenter feature activates as soon as you pause the image. The FI-500 will orient the fiber ferule directly in the center of the screen as well as initiate autofocus. This allows the user to inspect the fiber core easily without having to manually manipulate the fiber.
General Specifications |
|
Temperature range without the power
adapter |
Operating: 0 °C to +50 °C |
Temperature range with the power
adapter |
Operating: 0 °C to +40 °C |
Humidity range |
Operating: 0% to 95% °C (0 °C to +50
°C) RH non-condensing |
Altitude |
Operating: 4,000 meters |
Vibration |
2 g, 5 Hz to 500 Hz |
Shock |
1 meter drop test |
Safety |
IEC 61010-1 3rd Edition IEC 62133 |
Display |
|
Magnification |
1x, 2x, 4x |
Frames per second |
≥12 |
Battery type* |
Rechargeable NiMH, 2 x 1.2V, 2700 mAh |
Battery type* |
3 hours of continuous probe use |
Charge time |
4 hours minimum |
Power adapter |
Input: 100 to 240 VAC±10%, 50/60Hz |
Display |
3.2 inch TFT LCD, 320 x 240 |
Software upgrades |
Upgrades can be installed from a USB
drive |
Input |
USB 2.0, Type A |
Dimensions |
5.5 in x 3.2 in x 1.5 in (140 mm x 80
mm x 39 mm) |
Weight |
9.7 oz (275 g) |
Models
FI-500
FI-525
FTK1375
FTK1475
FI-500TP-APC
NFC-KIT-BOX
Accessories
FI-500TP-STF
FI-500TP-SCF
FI-500TP-FCF
MS2-MAG-KIT